The University of Queensland

Materials and Technologies of Mg-Air Primary Batteries

Chen, Xingrui, Le, Qichi, Venezuela, Jeffrey and Atrens, Andrej (2023). Materials and Technologies of Mg-Air Primary Batteries. Metal-Air Batteries. (pp. 65-76) Boca Raton: CRC Press. doi: 10.1201/9781003295761-5

Corrosion of metallic biomaterials

Venezuela, Jeffrey, Johnston, Sean, Dargusch, Matthew S. and Atrens, Andrej (2021). Corrosion of metallic biomaterials. Metallic biomaterials processing and medical device manufacturing. (pp. 469-515) edited by Cuie Wen. Duxford, United Kingdom: Woodhead Publishing/Elsevier. doi: 10.1016/b978-0-08-102965-7.00014-x

Electrochemical and mechanical aspects of hydrogen embrittlement evaluation of martensitic steels

Atrens, A., Venezuela, J., Liu, Q., Zhou, Q., Verbeken, K., Tapia-Bastidas, C., Gray, E., Christien, F. and Wolski, K. (2018). Electrochemical and mechanical aspects of hydrogen embrittlement evaluation of martensitic steels. Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry. (pp. 201-225) London, United Kingdom: Elsevier. doi: 10.1016/B978-0-12-409547-2.13770-9

Optimising degradation and mechanical performance of additively manufactured biodegradable Fe–Mn scaffolds using design strategies based on triply periodic minimal surfaces

Dargusch, Matthew S., Soro, Nicolas, Demir, Ali Gokhan, Venezuela, Jeffrey, Sun, Qiang, Wang, Yuan, Abdal-hay, Abdalla, Alali, Aya Q., Ivanovski, Saso, Previtali, Barbara and Kent, Damon (2024). Optimising degradation and mechanical performance of additively manufactured biodegradable Fe–Mn scaffolds using design strategies based on triply periodic minimal surfaces. Smart Materials in Medicine, 5 (1), 127-139. doi: 10.1016/j.smaim.2023.10.003

Advances in biodegradable piezoelectrics for medical implants

Liu, Ting, Wang, Yuan, Hong, Min, Venezuela, Jeffrey, Shi, Wei and Dargusch, Matthew (2023). Advances in biodegradable piezoelectrics for medical implants. Nano Today, 52 101945, 1-30. doi: 10.1016/j.nantod.2023.101945

Recent research progress in hydrogen embrittlement of additively manufactured metals – a review

Yao, Ju, Tan, Qiyang, Venezuela, Jeffrey, Atrens, Andrej and Zhang, Ming-Xing (2023). Recent research progress in hydrogen embrittlement of additively manufactured metals – a review. Current Opinion in Solid State and Materials Science, 27 (5) 101106, 101106. doi: 10.1016/j.cossms.2023.101106

Enhancement of hydrogen embrittlement resistance in a Fe-18Mn-0.6C twinning induced plasticity steel by copper alloying

Dong, Futao, Venezuela, Jeffrey, Li, Huixing, Shi, Zhiming, Zhou, Qingjun, Chen, Liansheng, Chen, Jun, Du, Linxiu and Atrens, Andrej (2023). Enhancement of hydrogen embrittlement resistance in a Fe-18Mn-0.6C twinning induced plasticity steel by copper alloying. Acta Materialia, 254 118888, 1-19. doi: 10.1016/j.actamat.2023.118888

Tailoring the discharge performance of extruded Mg-Sm-Al anode for Mg-air battery applications via control of Al content

Chen, Xingrui, Venezuela, Jeffrey, Shi, Zhiming, Le, Qichi and Dargusch, Matthew (2023). Tailoring the discharge performance of extruded Mg-Sm-Al anode for Mg-air battery applications via control of Al content. Materials Today Energy, 36 101363, 101363. doi: 10.1016/j.mtener.2023.101363

The influence of strain rate and annealing heat treatments on the corrosion and mechanical properties of WE43 and Zn7Ag biodegradable wires for application in soft tissue reconstructions

Mardina, Zahrina, Venezuela, Jeffrey, Sjafrizal, Teddy, Shi, Zhiming, Dargusch, Matthew S. and Atrens, Andrej (2023). The influence of strain rate and annealing heat treatments on the corrosion and mechanical properties of WE43 and Zn7Ag biodegradable wires for application in soft tissue reconstructions. Materials Today Communications, 35 105809, 105809. doi: 10.1016/j.mtcomm.2023.105809

Zinc-based subcuticular absorbable staples: An in vivo and in vitro study

Yang, Nan, Venezuela, Jeffrey, Allavena, Rachel, Lau, Cora and Dargusch, Matthew (2023). Zinc-based subcuticular absorbable staples: An in vivo and in vitro study. Acta Biomaterialia, 167, 593-607. doi: 10.1016/j.actbio.2023.06.030

A review of the origin of equiaxed grains during solidification under mechanical stirring, vibration, electromagnetic, electric-current, and ultrasonic treatments

Balasubramani, Nagasivamuni, Venezuela, Jeffrey, StJohn, David, Wang, Gui and Dargusch, Matthew (2023). A review of the origin of equiaxed grains during solidification under mechanical stirring, vibration, electromagnetic, electric-current, and ultrasonic treatments. Journal of Materials Science and Technology, 144, 243-265. doi: 10.1016/j.jmst.2022.09.067

The high corrosion-resistance of ultra-high purity Mg-Ge alloy and its discharge performance as anode for Mg-air battery

Chen, Xingrui, Venezuela, Jeffrey and Dargusch, Matthew (2023). The high corrosion-resistance of ultra-high purity Mg-Ge alloy and its discharge performance as anode for Mg-air battery. Electrochimica Acta, 448 142127, 1-15. doi: 10.1016/j.electacta.2023.142127

Exploring the influence of biologically relevant ions on the corrosion behavior of biodegradable zinc in physiological fluids

Almathami, Sharifah, Venezuela, Jeffrey, Yang, Nan, Wang, Yuan, Mardina, Zahrina and Dargusch, Matthew (2023). Exploring the influence of biologically relevant ions on the corrosion behavior of biodegradable zinc in physiological fluids. ACS Biomaterials Science and Engineering, 9 (5), 2301-2316. doi: 10.1021/acsbiomaterials.2c00901

Expedient secondary functions of flexible piezoelectrics for biomedical energy harvesting

Wang, Yuan, Hong, Min, Venezuela, Jeffrey, Liu, Ting and Dargusch, Matthew (2023). Expedient secondary functions of flexible piezoelectrics for biomedical energy harvesting. Bioactive Materials, 22, 291-311. doi: 10.1016/j.bioactmat.2022.10.003

A review of hydrogen embrittlement in gas transmission pipeline steels

Hoschke, Joshua, Chowdhury, Md Fahdul Wahab, Venezuela, Jeffrey and Atrens, Andrej (2023). A review of hydrogen embrittlement in gas transmission pipeline steels. Corrosion Reviews, 41 (3), 277-317. doi: 10.1515/corrrev-2022-0052

Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applications

Zhang, Meili, Yang, Nan, Dehghan-Manshadi, Ali, Venezuela, Jeffrey, Bermingham, Michael J. and Dargusch, Matthew S. (2023). Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applications. ACS Biomaterials Science and Engineering, 9 (3), 1261-1273. doi: 10.1021/acsbiomaterials.2c01228

Evolution of degradation mechanism and fixation strength of biodegradable Zn–Cu wire as sternum closure suture: an in vitro study

Yang, Nan, Venezuela, Jeffrey, Zhang, Jingqi, Wang, Anguo, Almathami, Sharifah and Dargusch, Matthew (2023). Evolution of degradation mechanism and fixation strength of biodegradable Zn–Cu wire as sternum closure suture: an in vitro study. Journal of the Mechanical Behavior of Biomedical Materials, 138 105658, 1-11. doi: 10.1016/j.jmbbm.2023.105658

Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating for temporary medical implant applications

Wang, Anguo, Venezuela, Jeffrey and Dargusch, Matthew Simon (2023). Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating for temporary medical implant applications. Progress in Organic Coatings, 174 107301, 1-18. doi: 10.1016/j.porgcoat.2022.107301

Feasibility of the use of gas phase inhibition of hydrogen embrittlement in gas transmission pipelines carrying hydrogen: a review

Atrens, Andrej, Gray, Evan, Venezuela, Jeffrey, Hoschke, Joshua and Roethig, Maximilian (2023). Feasibility of the use of gas phase inhibition of hydrogen embrittlement in gas transmission pipelines carrying hydrogen: a review. JOM, 75 (1), 232-238. doi: 10.1007/s11837-022-05559-8

Microstructure refinement in biodegradable Zn-Cu-Ca alloy for enhanced mechanical properties, degradation homogeneity, and strength retention in simulated physiological condition

Yang, Nan, Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Bielefeldt-Ohmann, Helle, Allavena, Rachel, Almathami, Sharifah and Dargusch, Matthew (2022). Microstructure refinement in biodegradable Zn-Cu-Ca alloy for enhanced mechanical properties, degradation homogeneity, and strength retention in simulated physiological condition. Journal of Materials Science and Technology, 125, 1-14. doi: 10.1016/j.jmst.2022.03.006

The influence of phosphorus on the temper embrittlement and hydrogen embrittlement of some dual-phase steels

Dong, Futao, Venezuela, Jeffrey, Li, Huixing, Shi, Zhiming, Zhou, Qingjun, Chen, Liansheng, Chen, Jun, Du, Linxiu and Atrens, Andrej (2022). The influence of phosphorus on the temper embrittlement and hydrogen embrittlement of some dual-phase steels. Materials Science and Engineering: A, 854 143379, 143379. doi: 10.1016/j.msea.2022.143379

An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals

Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Yang, Nan, Wang, Gui, StJohn, David and Dargusch, Matthew (2022). An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals. Ultrasonics Sonochemistry, 89 106151, 1-16. doi: 10.1016/j.ultsonch.2022.106151

Effect of cold deformation on the hydrogen permeation in a dual-phase advanced high-strength steel

Li, Huixing, Venezuela, Jeffrey, Zhou, Qingjun, Shi, Zhiming, Dong, Futao, Yan, Ming, Knibbe, Ruth, Zhang, Mingxing and Atrens, Andrej (2022). Effect of cold deformation on the hydrogen permeation in a dual-phase advanced high-strength steel. Electrochimica Acta, 424 140619, 140619. doi: 10.1016/j.electacta.2022.140619

Influence of hydrogen on the S–N fatigue of DP1180 advanced high-strength steel

Li, Huixing, Dong, Futao, Zhou, Qingjun, Shi, Zhiming, Venezuela, Jeffrey, Yan, Ming, Knibbe, Ruth, Zhang, Mingxing and Atrens, Andrej (2022). Influence of hydrogen on the S–N fatigue of DP1180 advanced high-strength steel. Corrosion Science, 205 110465, 110465. doi: 10.1016/j.corsci.2022.110465

Additively manufactured Fe-35Mn-1Ag lattice structures for biomedical applications

Dehghan-Manshadi, A., Venezuela, J., Demir, A. G., Ye, Q. and Dargusch, M. S. (2022). Additively manufactured Fe-35Mn-1Ag lattice structures for biomedical applications. Journal of Manufacturing Processes, 80, 642-650. doi: 10.1016/j.jmapro.2022.06.010

In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices

Dargusch, Matthew S., Balasubramani, Nagasivamuni, Yang, Nan, Johnston, Sean, Ali, Yahia, Wang, Gui, Venezuela, Jeffrey, Carluccio, Jiwon, Lau, Cora, Allavena, Rachel, Liang, Daniel, Mardon, Karine and Ye, Qingsong (2022). In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices. Bioactive Materials, 12, 85-96. doi: 10.1016/j.bioactmat.2021.10.026

Effect of shearing prestrain on the hydrogen embrittlement of 1180 MPa grade martensitic advanced high-strength steel

Li, Huixing, Venezuela, Jeffrey, Zhou, Qingjun, Shi, Zhiming, Yan, Ming, Knibbe, Ruth, Zhang, Mingxing, Dong, Futao and Atrens, Andrej (2022). Effect of shearing prestrain on the hydrogen embrittlement of 1180 MPa grade martensitic advanced high-strength steel. Corrosion Science, 199 110170, 110170. doi: 10.1016/j.corsci.2022.110170

The influence of the protein bovine serum albumin (BSA) on the corrosion of Mg, Zn, and Fe in Zahrina's simulated interstitial fluid

Mardina, Zahrina, Venezuela, Jeffrey, Dargusch, Matthew S., Shi, Zhiming and Atrens, Andrej (2022). The influence of the protein bovine serum albumin (BSA) on the corrosion of Mg, Zn, and Fe in Zahrina's simulated interstitial fluid. Corrosion Science, 199 110160, 1-19. doi: 10.1016/j.corsci.2022.110160

Design, mechanical and degradation requirements of biodegradable metal mesh for pelvic floor reconstruction

Mardina, Zahrina, Venezuela, Jeffrey, Maher, Christopher, Shi, Zhiming, Dargusch, Matthew S. and Atrens, Andrej (2022). Design, mechanical and degradation requirements of biodegradable metal mesh for pelvic floor reconstruction. Biomaterials Science, 10 (13), 3371-3392. doi: 10.1039/d2bm00179a

Ultrasonic treatment for the refinement of brittle CaZn13 phases in a biomedical Zn-Cu-Ca alloy

Balasubramani, Nagasivamuni, Yang, Nan, Venezuela, Jeffrey and Dargusch, Matthew (2021). Ultrasonic treatment for the refinement of brittle CaZn13 phases in a biomedical Zn-Cu-Ca alloy. Materials Letters, 305 130754, 130754. doi: 10.1016/j.matlet.2021.130754

Biodegradable shape memory alloys: progress and prospects

Wang, Yuan, Venezuela, Jeffrey and Dargusch, Matthew (2021). Biodegradable shape memory alloys: progress and prospects. Biomaterials, 279 121215, 1-28. doi: 10.1016/j.biomaterials.2021.121215

Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: current status, challenges, and future prospects

Yang, Nan, Venezuela, Jeffrey, Almathami, Sharifah and Dargusch, Matthew (2021). Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: current status, challenges, and future prospects. Biomaterials, 280 121301, 121301. doi: 10.1016/j.biomaterials.2021.121301

Hydrogen-induced fast fracture in notched 1500 and 1700 MPa class automotive martensitic advanced high-strength steel

Venezuela, Jeffrey, Hill, Timothy, Zhou, Qingjun, Li, Huixing, Shi, Zhiming, Dong, Futao, Knibbe, Ruth, Zhang, Mingxing, Dargusch, Matthew S. and Atrens, Andrej (2021). Hydrogen-induced fast fracture in notched 1500 and 1700 MPa class automotive martensitic advanced high-strength steel. Corrosion Science, 188 109550, 1-17. doi: 10.1016/j.corsci.2021.109550

Hydrogen fracture maps for sheared-edge-controlled hydrogen-delayed fracture of 1180 MPa advanced high-strength steels

Li, Huixing, Venezuela, Jeffrey, Qian, Zhen, Zhou, Qingjun, Shi, Zhiming, Yan, Ming, Knibbe, Ruth, Zhang, Mingxing, Dong, Futao and Atrens, Andrej (2021). Hydrogen fracture maps for sheared-edge-controlled hydrogen-delayed fracture of 1180 MPa advanced high-strength steels. Corrosion Science, 184 109360, 109360. doi: 10.1016/j.corsci.2021.109360

The influence of Ca and Cu additions on the microstructure, mechanical and degradation properties of Zn–Ca–Cu alloys for absorbable wound closure device applications

Yang, Nan, Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Almathami, Sharifah, Wen, Cuie and Dargusch, Matthew (2021). The influence of Ca and Cu additions on the microstructure, mechanical and degradation properties of Zn–Ca–Cu alloys for absorbable wound closure device applications. Bioactive Materials, 6 (5), 1436-1451. doi: 10.1016/j.bioactmat.2020.10.015

Effect of vanadium and rare earth microalloying on the hydrogen embrittlement susceptibility of a Fe-18Mn-0.6C TWIP steel studied using the linearly increasing stress test

Dong, Futao, Venezuela, Jeffrey, Li, Huixing, Shi, Zhiming, Zhou, Qingjun, Chen, Liansheng, Chen, Jun, Du, Linxiu and Atrens, Andrej (2021). Effect of vanadium and rare earth microalloying on the hydrogen embrittlement susceptibility of a Fe-18Mn-0.6C TWIP steel studied using the linearly increasing stress test. Corrosion Science, 185 109440, 1-17. doi: 10.1016/j.corsci.2021.109440

In vivo evaluation of bioabsorbable Fe‐35Mn‐1Ag: first reports on in vivo hydrogen gas evolution in Fe‐based implants

Dargusch, Matthew Simon, Venezuela, Jeffrey, Dehghan‐Manshadi, Ali, Johnston, Sean, Yang, Nan, Mardon, Karine, Lau, Cora and Allavena, Rachel (2020). In vivo evaluation of bioabsorbable Fe‐35Mn‐1Ag: first reports on in vivo hydrogen gas evolution in Fe‐based implants. Advanced Healthcare Materials, 10 (2) 2000667, 2000667. doi: 10.1002/adhm.202000667

Hydrogen embrittlement of an automotive 1700 MPa martensitic advanced high-strength steel

Venezuela, Jeffrey, Lim, Fang Yan, Liu, Li, James, Sonia, Zhou, Qingjun, Knibbe, Ruth, Zhang, Mingxing, Li, Huixing, Dong, Futao, Dargusch, Matthew S. and Atrens, Andrej (2020). Hydrogen embrittlement of an automotive 1700 MPa martensitic advanced high-strength steel. Corrosion Science, 171 108726, 108726. doi: 10.1016/j.corsci.2020.108726

Addressing the slow corrosion rate of biodegradable Fe-Mn: Current approaches and future trends

Venezuela, J. and Dargusch, M. S. (2020). Addressing the slow corrosion rate of biodegradable Fe-Mn: Current approaches and future trends. Current Opinion in Solid State and Materials Science, 24 (3) 100822, 100822. doi: 10.1016/j.cossms.2020.100822

Effect of plastic strain damage on the hydrogen embrittlement of a dual-phase (DP) and a quenching and partitioning (Q&P) advanced high-strength steel

Li, Huixing, Venezuela, Jeffrey, Zhou, Qingjun, Shi, Zhiming, Yan, Ming, Knibbe, Ruth, Zhang, Mingxing, Dong, Futao and Atrens, Andrej (2020). Effect of plastic strain damage on the hydrogen embrittlement of a dual-phase (DP) and a quenching and partitioning (Q&P) advanced high-strength steel. Materials Science and Engineering A, 785 139343, 139343. doi: 10.1016/j.msea.2020.139343

Improved biodegradable magnesium alloys through advanced solidification processing

Dargusch, M.S., Balasubramani, N., Venezuela, J., Johnston, S., Wang, G., Lau, C., Bermingham, M., Kent, D. and StJohn, D.H. (2020). Improved biodegradable magnesium alloys through advanced solidification processing. Scripta Materialia, 177, 234-240. doi: 10.1016/j.scriptamat.2019.10.028

Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications

Carluccio, Danilo, Xu, Chun, Venezuela, Jeffrey, Cao, Yuxue, Kent, Damon, Bermingham, Michael, Demir, Ali Gökhan, Previtali, Barbara, Ye, Qingsong and Dargusch, Matthew (2020). Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications. Acta Biomaterialia, 103, 346-360. doi: 10.1016/j.actbio.2019.12.018

In- situ observation of the continuous phase transition in determining the high thermoelectric performance of polycrystalline Sn0.98Se

Dargusch, Matthew, Shi, Xiao-Lei, Tran, Xuan Quy, Feng, Tianli, Somidin, Flora, Tan, Xin, Liu, Weidi, Jack, Kevin, Venezuela, Jeffrey, Maeno, Hiroshi, Toriyama, Takaaki, Matsumura, Syo, Pantelides, Sokrates T. and Chen, Zhi-Gang (2019). In- situ observation of the continuous phase transition in determining the high thermoelectric performance of polycrystalline Sn0.98Se. Journal of Physical Chemistry Letters, 10 (21), 6512-6517. doi: 10.1021/acs.jpclett.9b02818

Comparison of the microstructure and biocorrosion properties of additively manufactured and conventionally fabricated near β Ti–25Nb–3Zr–3Mo–2Sn alloy

Dargusch, Matthew S., Wang, Gui, Kent, Damon, Bermingham, Michael, Venezuela, Jeffrey, Frith, Jessica E., Yu, Zhentao, Yu, Sen and Shi, Zhiming (2019). Comparison of the microstructure and biocorrosion properties of additively manufactured and conventionally fabricated near β Ti–25Nb–3Zr–3Mo–2Sn alloy. ACS Biomaterials Science and Engineering, 5 (11) acsbiomaterials.9b00596, 5844-5856. doi: 10.1021/acsbiomaterials.9b00596

The prospects for biodegradable zinc in wound closure applications

Venezuela, Jeffrey Jones D., Johnston, Sean and Dargusch, Matthew Simon (2019). The prospects for biodegradable zinc in wound closure applications. Advanced Healthcare Materials, 8 (16) 1900408, 1900408. doi: 10.1002/adhm.201900408

Investigating Mg Biocorrosion In Vitro: Lessons Learned and Recommendations

Johnston, Sean, Shi, Zhiming, Venezuela, Jeffrey, Wen, Cuie, Dargusch, Matthew S. and Atrens, Andrej (2019). Investigating Mg Biocorrosion In Vitro: Lessons Learned and Recommendations. JOM, 71 (4), 1406-1413. doi: 10.1007/s11837-019-03327-9

The Influence of Alloying and Fabrication Techniques on the Mechanical Properties, Biodegradability and Biocompatibility of Zinc: A Comprehensive Review

Venezuela, J. and Dargusch, M.S. (2019). The Influence of Alloying and Fabrication Techniques on the Mechanical Properties, Biodegradability and Biocompatibility of Zinc: A Comprehensive Review. Acta Biomaterialia, 87, 1-40. doi: 10.1016/j.actbio.2019.01.035

Exploring the role of manganese on the microstructure, mechanical properties, biodegradability and biocompatibility of porous iron-based scaffolds

Dargusch, Matthew, Dehghan-Manshadi, Ali, Shahbazi, Mahboobeth, Venezuela, Jeffrey, Tran, Xuan, Song, Jing, Liu, Na, Xu, Chun, Ye, Qingsong and Wen, Cuie (2019). Exploring the role of manganese on the microstructure, mechanical properties, biodegradability and biocompatibility of porous iron-based scaffolds. ACS Biomaterials Science and Engineering, 5 (4) acsbiomaterials.8b01497, 1686-1702. doi: 10.1021/acsbiomaterials.8b01497

Evaluation of the influence of hydrogen on some commercial DP, Q&P and TWIP advanced high-strength steels during automobile service

Liu, Qinglong, Zhou, Qingjun, Venezuela, Jeffrey, Zhang, Mingxing and Atrens, Andrej (2018). Evaluation of the influence of hydrogen on some commercial DP, Q&P and TWIP advanced high-strength steels during automobile service. Engineering Failure Analysis, 94, 249-273. doi: 10.1016/j.engfailanal.2018.08.011

The influence of microstructure on the hydrogen embrittlement susceptibility of martensitic advanced high strength steels

Venezuela, Jeffrey, Zhou, Qingjun, Liu, Qinglong, Li, Huixing, Zhang, Mingxing, Dargusch, Matthew S. and Atrens, Andrej (2018). The influence of microstructure on the hydrogen embrittlement susceptibility of martensitic advanced high strength steels. Materials Today Communications, 17, 1-14. doi: 10.1016/j.mtcomm.2018.07.011

Stress corrosion cracking of EV31A in 0.1 M Na2SO4 saturated with Mg(OH)2

Li, Yifeng, Zhou, Yushan, Shi, Zhiming, Venezuela, Jeffrey, Soltan, Akif and Atrens, Andrej (2018). Stress corrosion cracking of EV31A in 0.1 M Na2SO4 saturated with Mg(OH)2. Journal of Magnesium and Alloys, 6 (4), 337-345. doi: 10.1016/j.jma.2018.09.001

Evaluation of automobile service performance using laboratory testing

Atrens, Andrej, Liu, Qinglong, Zhou, Qingjun, Venezuela, Jeffrey and Zhang, Mingxing (2018). Evaluation of automobile service performance using laboratory testing. Materials Science and Technology, 34 (15), 1893-1909. doi: 10.1080/02670836.2018.1495903

Further study of the hydrogen embrittlement of martensitic advanced high-strength steel in simulated auto service conditions

Venezuela, Jeffrey, Blanch, Jethro, Zulkiply, Azmir, Liu, Qinglong, Zhou, Qingjun, Zhang, Mingxing and Atrens, Andrej (2018). Further study of the hydrogen embrittlement of martensitic advanced high-strength steel in simulated auto service conditions. Corrosion Science, 135, 120-135. doi: 10.1016/j.corsci.2018.02.037

The role of the microstructure on the influence of hydrogen on some advanced high-strength steels

Liu, Qinglong, Zhou, Qingjun, Venezuela, Jeffrey, Zhang, Mingxing and Atrens, Andrej (2018). The role of the microstructure on the influence of hydrogen on some advanced high-strength steels. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 715, 370-378. doi: 10.1016/j.msea.2017.12.079

Equivalent Hydrogen Fugacity during Electrochemical Charging of 980DP Steel Determined by Thermal Desorption Spectroscopy

Liu, Qinglong, Gray, Evan, Venezuela, Jeffrey, Zhou, Qingjun, Tapia-Bastidas, Clotario, Zhang, Mingxing and Atrens, Andrej (2018). Equivalent Hydrogen Fugacity during Electrochemical Charging of 980DP Steel Determined by Thermal Desorption Spectroscopy. Advanced Engineering Materials, 20 (1) 1700469. doi: 10.1002/adem.201700469

Hydrogen trapping in some automotive martensitic advanced high-strength steels

Venezuela, Jeffrey, Zhou, Qingjun, Liu, Qinglong, Zhang, Mingxing and Atrens, Andrej (2018). Hydrogen trapping in some automotive martensitic advanced high-strength steels. Advanced Engineering Materials, 20 (1) 1700468, 1700468. doi: 10.1002/adem.201700468

Determination of the equivalent hydrogen fugacity during electrochemical charging of 3.5NiCrMoV steel

Venezuela, Jeffrey, Tapia-Bastidas, Clotario, Zhou, Qingjun, Depover, Tom, Verbeken, Kim, Gray, Evan, Liu, Qinglong, Liu, Qian, Zhang, Mingxing and Atrens, Andrej (2017). Determination of the equivalent hydrogen fugacity during electrochemical charging of 3.5NiCrMoV steel. Corrosion Science, 132, 90-106. doi: 10.1016/j.corsci.2017.12.018

Equivalent hydrogen fugacity during electrochemical charging of some martensitic advanced high-strength steels

Venezuela, Jeffrey, Gray, Evan, Liu, Qinglong, Zhou, Qingjun, Tapia-Bastidas, Clotario, Zhang, Mingxing and Atrens, Andrej (2017). Equivalent hydrogen fugacity during electrochemical charging of some martensitic advanced high-strength steels. Corrosion Science, 127, 45-58. doi: 10.1016/j.corsci.2017.08.011

Hydrogen influence on some advanced high-strength steels

Liu, Qinglong, Zhou, Qingjun, Venezuela, Jeffrey, Zhang, Mingxing and Atrens, Andrej (2017). Hydrogen influence on some advanced high-strength steels. Corrosion Science, 125, 114-138. doi: 10.1016/j.corsci.2017.06.012

Hydrogen trapping in some advanced high strength steels

Liu, Qinglong, Venezuela, Jeffrey, Zhang, Mingxing, Zhou, Qingjun and Atrens, Andrej (2016). Hydrogen trapping in some advanced high strength steels. Corrosion Science, 111, 770-785. doi: 10.1016/j.corsci.2016.05.046

Influence of hydrogen on the mechanical and fracture properties of some martensitic advanced high strength steels in simulated service conditions

Venezuela, Jeffrey, Zhou, Qingjun, Liu, Qinglong, Zhang, Mingxing and Atrens, Andrej (2016). Influence of hydrogen on the mechanical and fracture properties of some martensitic advanced high strength steels in simulated service conditions. Corrosion Science, 111, 602-624. doi: 10.1016/j.corsci.2016.05.040

Hydrogen concentration in dual-phase (DP) and quenched and partitioned (Q&P) advanced high-strength steels (AHSS) under simulated service conditions compared with cathodic charging conditions

Liu, Qinglong, Zhou, Qingjun, Venezuela, Jeffrey, Zhang, Mingxing and Atrens, Andrej (2016). Hydrogen concentration in dual-phase (DP) and quenched and partitioned (Q&P) advanced high-strength steels (AHSS) under simulated service conditions compared with cathodic charging conditions. Advanced Engineering Materials, 18 (9), 1588-1599. doi: 10.1002/adem.201600217

A review of hydrogen embrittlement of martensitic advanced high-strength steels

Venezuela, Jeffrey, Liu, Qinglong, Zhang, Mingxing, Zhou, Qingjun and Atrens, Andrej (2016). A review of hydrogen embrittlement of martensitic advanced high-strength steels. Corrosion Reviews, 34 (3), 153-186. doi: 10.1515/corrrev-2016-0006

A review of the influence of hydrogen on the mechanical properties of DP, TRIP, and TWIP advanced high-strength steels for auto construction

Liu, Qinglong, Zhou, Qingjun, Venezuela, Jeffrey, Zhang, Mingxing, Wang, Jianqiu and Atrens, Andrej (2016). A review of the influence of hydrogen on the mechanical properties of DP, TRIP, and TWIP advanced high-strength steels for auto construction. Corrosion Reviews, 34 (3), 127-152. doi: 10.1515/corrrev-2015-0083

The influence of hydrogen on the mechanical and fracture properties of some martensitic advanced high strength steels studied using the linearly increasing stress test

Venezuela, Jeffrey, Liu, Qinglong, Zhang, Mingxing, Zhou, Qingjun and Atrens, Andrej (2015). The influence of hydrogen on the mechanical and fracture properties of some martensitic advanced high strength steels studied using the linearly increasing stress test. Corrosion Science, 99, 98-117. doi: 10.1016/j.corsci.2015.06.038

Assessing hydrogen embrittlement susceptibility of automotive MS-AHSS using the linearly increasing stress test

Venezuela, J., Liu, Q., Zhang, M., Zhou, Q. and Atrens, A. (2016). Assessing hydrogen embrittlement susceptibility of automotive MS-AHSS using the linearly increasing stress test. Annual ACA Conference on Corrosion and Prevention 2016, Auckland, New Zealand, 13 - 16 November 2016. Kerrimuir VIC Australia: Australasian Corrosion Association.

Hydrogen permeation in dual phase (DP) and quenched and partitioned (Q&P) advanced high strength steels (AHSS) under cathodic charging and simulated service conditions

Liu, Qinglong, Venezuela, Jeffrey, Zhang, Mingxing, Zhou, Qingjun and Atrens, Andrej (2016). Hydrogen permeation in dual phase (DP) and quenched and partitioned (Q&P) advanced high strength steels (AHSS) under cathodic charging and simulated service conditions. EUROCORR 2016, Montpellier, France, 11 - 15 September 2016. Cefracor.

Hydrogen permeation in dual phase (DP) and quenched and partitioned (Q&P) advanced high strength steels (AHSS) under cathodic charging and simulated service conditions

Venezuela, Jeffrey, Zhang, Mingxing, Zhou, Qingjun and Liu, Qinglong (2016). Hydrogen permeation in dual phase (DP) and quenched and partitioned (Q&P) advanced high strength steels (AHSS) under cathodic charging and simulated service conditions. 2016 European Corrosion Congress, Montpellier, France, 11-15 September 2016.

ZnCu wire suture data

Yang, Nan, Dargusch, Matthew, Venezuela, Jeffrey, Lau, Cora and Allavena, Rachel (2022). ZnCu wire suture data. The University of Queensland. (Dataset) doi: 10.48610/017d985

Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating

Wang, Anguo, Dargusch, Matthew and Venezuela, Jeffrey (2021). Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating. The University of Queensland. (Dataset) doi: 10.48610/5716f87

Corrosion of BM in bile

Venezuela, Jeffrey and Dargusch, Matthew (2021). Corrosion of BM in bile. The University of Queensland. (Dataset) doi: 10.48610/1abe36d

Notched MS1700 and MS1500_LIST

Venezuela, Jeffrey and Atrens, Andrej (2021). Notched MS1700 and MS1500_LIST. The University of Queensland. (Dataset) doi: 10.14264/6459cad

Biodegradable Fe-35Mn-1Ag

Venezuela, Jeffrey, Dargusch, Matthew and Yang, Nan (2020). Biodegradable Fe-35Mn-1Ag. The University of Queensland. (Dataset) doi: 10.14264/cd36ebe

The influence of hydrogen on MS980, MS1180, MS1300 and MS1500 martensitic advanced high strength steels used for automotive applications

Venezuela, Jeffrey Jones de Guzman (2017). The influence of hydrogen on MS980, MS1180, MS1300 and MS1500 martensitic advanced high strength steels used for automotive applications. PhD Thesis, School of Mechanical and Mining Engineering, The University of Queensland. doi: 10.14264/uql.2017.799