The University of Queensland

A novel approach for facile synthesis of biocompatible PVA-coated PLA nanofibers as composite membrane scaffolds for enhanced osteoblast proliferation

Abdal-Hay, Abdalla, Makhlouf, Abdel Salam Hamdy and Vanegas, Pablo (2015). A novel approach for facile synthesis of biocompatible PVA-coated PLA nanofibers as composite membrane scaffolds for enhanced osteoblast proliferation. In Handbook of nanoceramic and nanocomposite coatings and materials (pp. 87-113) Amsterdam, Netherlands: Butterworth-Heinemann. doi:10.1016/B978-0-12-799947-0.00004-3

New configurations for sea water desalination system using Ranque-Hilsch vortex tubes

Shmroukh, Ahmed Nagah, Radwan, Ali, Abdal-hay, Abdalla, Serageldin, Ahmed A. and Nasr, Mahmoud (2019) New configurations for sea water desalination system using Ranque-Hilsch vortex tubes. Applied Thermal Engineering, 157 . doi:10.1016/j.applthermaleng.2019.113757

Magnesium-particle/polyurethane composite layer coating on titanium surfaces for orthopedic applications

Abdal-hay, Abdalla, Agour, Mahmoud, Kim, Yu-Kyoung, Lee, Min-Ho, Hassan, Mohamed K., El-Ainin, H. Abu, Hamdy, Abdel Salam and Ivanovski, Sašo (2019) Magnesium-particle/polyurethane composite layer coating on titanium surfaces for orthopedic applications. European Polymer Journal, 112 555-568. doi:10.1016/j.eurpolymj.2018.10.012

Engineering of electrically-conductive poly(ε-caprolactone)/ multi-walled carbon nanotubes composite nanofibers for tissue engineering applications

Abdal-hay, Abdalla, Taha, Mohamed, Mousa, Hamouda M., Bartnikowski, Michal, Hassan, Mohammad L., Dewidar, Montasser and Ivanovski, Saso (2019) Engineering of electrically-conductive poly(ε-caprolactone)/ multi-walled carbon nanotubes composite nanofibers for tissue engineering applications. Ceramics International, . doi:10.1016/j.ceramint.2019.04.206

Fabrication of a thick three-dimensional scaffold with an open cellular-like structure using airbrushing and thermal cross-linking of molded short nanofibers

Abdal-Hay, Abdalla, Hamlet, Stephen and Ivanovski, Saso (2018) Fabrication of a thick three-dimensional scaffold with an open cellular-like structure using airbrushing and thermal cross-linking of molded short nanofibers. Biofabrication, 11 1: . doi:10.1088/1758-5090/aae421

Novel polycaprolactone/hydroxyapatite nanocomposite fibrous scaffolds by direct melt-electrospinning writing

Abdal-hay, Abdalla, Abbasi, Naghmeh, Gwiazda, Marcin, Hamlet, Stephen and Ivanovski, Saso (2018) Novel polycaprolactone/hydroxyapatite nanocomposite fibrous scaffolds by direct melt-electrospinning writing. European Polymer Journal, 105 257-264. doi:10.1016/j.eurpolymj.2018.05.034

A multifunctional zinc oxide/poly(lactic acid) nanocomposite layer coated on magnesium alloys for controlled degradation and antibacterial function

Mousa, Hamouda M, Abdal-Hay, Abdalla, Bartnikowski, Michal, Mohamed, Ibrahim, Yasin, Ahmed, Ivanovski, Saso, Park, Chan Hee and Kim, Cheol Sang (2018) A multifunctional zinc oxide/poly(lactic acid) nanocomposite layer coated on magnesium alloys for controlled degradation and antibacterial function. ACS Biomaterials Science and Engineering, 4 6: 2169-2180. doi:10.1021/acsbiomaterials.8b00277

Electrospun biphasic tubular scaffold with enhanced mechanical properties for vascular tissue engineering

Abdal-hay, Abdalla, Bartnikowski, Michal, Hamlet, Stephen and Ivanovski, Saso (2018) Electrospun biphasic tubular scaffold with enhanced mechanical properties for vascular tissue engineering. Materials Science and Engineering C: Materials for Biological Applications, 82 10-18. doi:10.1016/j.msec.2017.08.041

Rapid fabrication of highly porous and biocompatible composite textile tubular scaffold for vascular tissue engineering

Abdal-hay, Abdalla, Memic, Adnan, Hussein, Kamal H., Oh, Yi Seul, Fouad, Mohamed, Al-Jassir, Fawzi F., Woo, Heung-Myong, Morsi, Yosry, Mo, Xiumei and Ivanovski, Sašo (2017) Rapid fabrication of highly porous and biocompatible composite textile tubular scaffold for vascular tissue engineering. European Polymer Journal, 96 27-43. doi:10.1016/j.eurpolymj.2017.08.054

Biocompatibility properties of polyamide 6/PCL blends composite textile scaffold using EA.hy926 human endothelial cells

Abdal-Hay, Abdalla, Abdelrazek Khalil, Khalil, Al-Jassir, Fawzi F and Gamal-Eldeen, Amira M. (2017) Biocompatibility properties of polyamide 6/PCL blends composite textile scaffold using EA.hy926 human endothelial cells. Biomedical Materials, 12 3: . doi:10.1088/1748-605X/aa6306

Fabrication of highly porous biodegradable biomimetic nanocomposite as advanced bone tissue scaffold

Abdal-hay, Abdalla, Khalil, Khalil Abdelrazek, Hamdy, Abdel Salam and Al-Jassir, Fawzi F. (2017) Fabrication of highly porous biodegradable biomimetic nanocomposite as advanced bone tissue scaffold. Arabian Journal of Chemistry, 10 2: 240-252. doi:10.1016/j.arabjc.2016.09.021

Erratum: Biocorrosion behavior of biodegradable nanocomposite fibers coated layer-by-layer on AM50 magnesium implant (Materials Science and Engineering C (2016) 58 (1232-1241))

Abdal-Hay, Abdalla, Hasan, Anwarul, Kim, Yu-Kyoung, Lee, Min-Ho, Hamdy, Abdel Salam and Khalil, Khalil Abdelrazek (2016) Erratum: Biocorrosion behavior of biodegradable nanocomposite fibers coated layer-by-layer on AM50 magnesium implant (Materials Science and Engineering C (2016) 58 (1232-1241)). Materials Science and Engineering C, 61 . doi:10.1016/j.msec.2016.01.024

Fabrication of novel high performance ductile poly(lactic acid) nanofiber scaffold coated with poly(vinyl alcohol) for tissue engineering applications

Abdal-hay, Abdalla, Hussein, Kamal Hany, Casettari, Luca, Khalil, Khalil Abdelrazek and Hamdy, Abdel Salam (2016) Fabrication of novel high performance ductile poly(lactic acid) nanofiber scaffold coated with poly(vinyl alcohol) for tissue engineering applications. Materials Science and Engineering C: Materials for Biological Applications, 60 143-150. doi:10.1016/j.msec.2015.11.024

Biocorrosion behavior of biodegradable nanocomposite fibers coated layer-by-layer on AM50 magnesium implant

Abdal-Hay, Abdalla, Hasan, Anwarul, Yu-Kyoung, Lee, Min-Ho, Hamdy, Abdel Salam and Khalil, Khalil Abdelrazek (2016) Biocorrosion behavior of biodegradable nanocomposite fibers coated layer-by-layer on AM50 magnesium implant. Materials Science and Engineering: C, 58 1232-1241. doi:10.1016/j.msec.2015.09.065

A facile manufacturing of Ag/SiO2 nanofibers and nanoparticles composites via a simple hydrothermal plasma method

Abdal-hay, Abdalla, Hamdy, Abdel Salarn, Abdel-Jaber, G. T., Barakat, Nasser A. M., Ebnalwaled, A. A. and Khalil, Khalil Abdelrazek (2015) A facile manufacturing of Ag/SiO2 nanofibers and nanoparticles composites via a simple hydrothermal plasma method. Ceramics International, 41 9 Part B: 12447-12452. doi:10.1016/j.ceramint.2015.06.082

Novel, facile, single-step technique of polymer/TiO2 nanofiber composites membrane for photodegradation of methylene blue

Abdal-hay, Abdalla, Makhlouf, Abdel Salam Hamdy and Khalil, Khalil Abdelrazek (2015) Novel, facile, single-step technique of polymer/TiO2 nanofiber composites membrane for photodegradation of methylene blue. ACS Applied Materials and Interfaces, 7 24: 13329-13341. doi:10.1021/acsami.5b01418

Fabrication of durable high performance hybrid nanofiber scaffolds for bone tissue regeneration using a novel, simple in situ deposition approach of polyvinyl alcohol on electrospun nylon 6 nanofibers

Abdal-hay, Abdalla, Hamdy, Abdel Salam and Khalil, Khalil Abdelrazek (2015) Fabrication of durable high performance hybrid nanofiber scaffolds for bone tissue regeneration using a novel, simple in situ deposition approach of polyvinyl alcohol on electrospun nylon 6 nanofibers. Materials Letters, 147 25-28. doi:10.1016/j.matlet.2015.02.005

A novel simple one-step air jet spinning approach for deposition of poly(vinyl acetate)/hydroxyapatite composite nanofibers on Ti implants

Abdal-hay, Abdalla, Hamdy, Abdel Salam, Khalil, Khalil Abdelrazek and Lim, Ju Hyun (2015) A novel simple one-step air jet spinning approach for deposition of poly(vinyl acetate)/hydroxyapatite composite nanofibers on Ti implants. Materials Science and Engineering C: Materials for Biological Applications, 49 681-690. doi:10.1016/j.msec.2015.01.008

Preparation and characterization of vertically arrayed hydroxyapatite nanoplates on electrospun nanofibers for bone tissue engineering (vol 254, pg 612, 2014)

Abdal-hay, Abdalla, Vanegas, Pablo, Hamdy, Abdel Salam, Engel, Felix B. and Lim, Ju Hyun (2015) Preparation and characterization of vertically arrayed hydroxyapatite nanoplates on electrospun nanofibers for bone tissue engineering (vol 254, pg 612, 2014). Chemical Engineering Journal, 264 972-972. doi:10.1016/j.cej.2014.10.085

Biodegradable poly(lactic acid)/multiwalled carbon nanotube nanocomposite fabrication using casting and hot press techniques

Park, S. G., Abdal-Hay, A. and Lim, J. K. (2015) Biodegradable poly(lactic acid)/multiwalled carbon nanotube nanocomposite fabrication using casting and hot press techniques. Archives of Metallurgy and Materials, 60 2: 1557-1559. doi:10.1515/amm-2015-0172

A novel simple in situ biomimetic and simultaneous deposition of bonelike apatite within biopolymer matrix as bone graft substitutes

Abdal-hay, Abdalla, Hamdy, Abdel Salam, Khalil, Khalil Abdelrazek and Lim, Ju Hyun (2014) A novel simple in situ biomimetic and simultaneous deposition of bonelike apatite within biopolymer matrix as bone graft substitutes. Materials Letters, 137 260-264. doi:10.1016/j.matlet.2014.09.038

Novel bone regeneration matrix for next-generation biomaterial using a vertical array of carbonated hydroxyapatite nanoplates coated onto electrospun nylon 6 nanofibers

Abdal-hay, Abdalla, Hamdy, Abdel Salam, Morsi, Yosry, Khalil, Khalil Abdelrazek and Lim, Ju Hyun (2014) Novel bone regeneration matrix for next-generation biomaterial using a vertical array of carbonated hydroxyapatite nanoplates coated onto electrospun nylon 6 nanofibers. Materials Letters, 137 378-381. doi:10.1016/j.matlet.2014.09.034

Preparation and characterization of vertically arrayed hydroxyapatite nanoplates on electrospun nanofibers for bone tissue engineering

Abd Al-Hay, Abdalla, Vanegas, Pablo, Hamdy, Abdel Salam, Engel, Felix B. and Lim, Ju Hyun (2014) Preparation and characterization of vertically arrayed hydroxyapatite nanoplates on electrospun nanofibers for bone tissue engineering. Chemical Engineering Journal, 254 612-622. doi:10.1016/j.cej.2014.05.118

TiO2 nanorods coated onto nylon 6 nanofibers using hydrothermal treatment with improved mechanical properties

Abdal-hay, Abdalla, Mousa, Hamouda M., Khan, Azizuddin, Vanegas, Pablo and Lim, Ju Hyun (2014) TiO2 nanorods coated onto nylon 6 nanofibers using hydrothermal treatment with improved mechanical properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 457 1: 275-281. doi:10.1016/j.colsurfa.2014.05.058

In vitro deposition of Ca-P nanoparticles on air jet spinning Nylon 6 nanofibers scaffold for bone tissue engineering

Abdal-Hay, Abdalla, Oh, Yi Seul, Yousef, Ayman, Pant, Hem Raj, Vanegas, Pablo and Lim, Jae Kyoo (2014) In vitro deposition of Ca-P nanoparticles on air jet spinning Nylon 6 nanofibers scaffold for bone tissue engineering. Applied Surface Science, 307 69-76. doi:10.1016/j.apsusc.2014.03.161

Fabrication and characterization of silver nanostructures conformal coating layer onto electrospun N6 nanofibers with improved physical properties

Abdal-hay, Abdalla, Khalil, Khalil Abdelrazek, Lim, Juhyun and Lim, Jae Kyoo (2014) Fabrication and characterization of silver nanostructures conformal coating layer onto electrospun N6 nanofibers with improved physical properties. Journal of Sol-Gel Science and Technology, 71 1: 184-191. doi:10.1007/s10971-014-3337-1

In vitro bioactivity of implantable Ti materials coated with PVAc membrane layer

Abdal-hay, Abdalla, Hamdy, Abdel Salam, Abdellah, Mohammed Y. and Lim, Juhyun (2014) In vitro bioactivity of implantable Ti materials coated with PVAc membrane layer. Materials Letters, 126 267-270. doi:10.1016/j.matlet.2014.04.048

Air jet spray of nylon 6 membrane structures for bone tissue engineering

Abdal-Hay, Abdalla, Vanegas, Pablo and Lim, Jae Kyoo (2014) Air jet spray of nylon 6 membrane structures for bone tissue engineering. Materials Letters, 125 51-55. doi:10.1016/j.matlet.2014.03.138

An in situ hydrothermal fabrication process of poly (vinyl alcohol)/apatite-like nanocomposites with improved thermal and mechanical properties

Abdal-hay, Abdalla, Kim, Chul In and Lim, Jae Kyoo (2014) An in situ hydrothermal fabrication process of poly (vinyl alcohol)/apatite-like nanocomposites with improved thermal and mechanical properties. Ceramics International, 40 3: 4995-5000. doi:10.1016/j.ceramint.2013.08.057

Enhanced biocorrosion resistance of surface modified magnesium alloys using inorganic/organic composite layer for biomedical applications

Abdal-hay, Abdalla, Dewidar, Montasser, Lim, Juhyun and Lim, Jae Kyoo (2014) Enhanced biocorrosion resistance of surface modified magnesium alloys using inorganic/organic composite layer for biomedical applications. Ceramics International, 40 1 Part B: 2237-2247. doi:10.1016/j.ceramint.2013.07.142

Facile preparation of titanium dioxide micro/nanofibers and tubular structures by air jet spinning

Abdal-Hay, Abdalla, Hamdy, Abdel Salam and Lim, Ju Hyun (2014) Facile preparation of titanium dioxide micro/nanofibers and tubular structures by air jet spinning. Ceramics International, 40 10: 15403-15409. doi:10.1016/j.ceramint.2014.06.028

Chitin butyrate coated electrospun nylon-6 fibers for biomedical applications

Pant, Hem Raj, Kim, Han Joo, Bhatt, Lok Ranjan, Joshi, Mahesh Kumar, Kim, Eun Kyo, Kim, Jeong In, Abdal-Hay, Abdalla, Hui, K. S. and Kim, Cheol Sang (2013) Chitin butyrate coated electrospun nylon-6 fibers for biomedical applications. Applied Surface Science, 285 Part B: 538-544. doi:10.1016/j.apsusc.2013.08.089

Ultrathin conformal coating of apatite nanostructures onto electrospun nylon 6 nanofibers: mimicking the extracellular matrix

Abdal-hay, Abdalla, Lim, Juhyun, Hassan, M. Shamshi and Lim, Jae Kyoo (2013) Ultrathin conformal coating of apatite nanostructures onto electrospun nylon 6 nanofibers: mimicking the extracellular matrix. Chemical Engineering Journal, 228 708-716. doi:10.1016/j.cej.2013.05.022

Super-hydrophilic electrospun nylon-6/hydroxyapatite membrane for bone tissue engineering

Abdal-hay, Abdalla, Pant, Hem Raj and Lim, Jae Kyoo (2013) Super-hydrophilic electrospun nylon-6/hydroxyapatite membrane for bone tissue engineering. European Polymer Journal, 49 6: 1314-1321. doi:10.1016/j.eurpolymj.2013.02.004

Biocorrosion and osteoconductivity of PCL/nHAp composite porous film-based coating of magnesium alloy

Abdal-hay, Abdalla, Amna, Touseef and Lim, Jae Kyoo (2013) Biocorrosion and osteoconductivity of PCL/nHAp composite porous film-based coating of magnesium alloy. Solid State Sciences, 18 131-140. doi:10.1016/j.solidstatesciences.2012.11.017

Influence of electrospinning and dip-coating techniques on the degradation and cytocompatibility of Mg-based alloy

Abdal-hay, Abdalla, Barakat, Nasser A. M. and Lim, Jae Kyoo (2013) Influence of electrospinning and dip-coating techniques on the degradation and cytocompatibility of Mg-based alloy. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 420 37-45. doi:10.1016/j.colsurfa.2012.12.009

Air jet spinning of hydroxyapatite/poly(lactic acid) hybrid nanocomposite membrane mats for bone tissue engineering

Abdal-haya, Abdalla, Sheikh, Faheem A. and Lim, Jae Kyoo (2013) Air jet spinning of hydroxyapatite/poly(lactic acid) hybrid nanocomposite membrane mats for bone tissue engineering. Colloids and Surfaces B: Biointerfaces, 102 635-643. doi:10.1016/j.colsurfb.2012.09.017

Characterization of the surface biocompatibility of an electrospun nylon 6/CaP nanofiber scaffold using osteoblasts

Abdal-hay, Abdalla, Tijing, Leonard D. and Lim, Jae Kyoo (2013) Characterization of the surface biocompatibility of an electrospun nylon 6/CaP nanofiber scaffold using osteoblasts. Chemical Engineering Journal, 215 57-64. doi:10.1016/j.cej.2012.10.046

Hydroxyapatite-doped poly(lactic acid) porous film coating for enhanced bioactivity and corrosion behavior of AZ31 Mg alloy for orthopedic applications

Abdal-hay, Abdalla, Barakat, Nasser A. M. and Lim, Jae Kyoo (2013) Hydroxyapatite-doped poly(lactic acid) porous film coating for enhanced bioactivity and corrosion behavior of AZ31 Mg alloy for orthopedic applications. Ceramics International, 39 1: 183-195. doi:10.1016/j.ceramint.2012.06.008

In vitro bioactivity of titanium implants coated with bicomponent hybrid biodegradable polymers

Abdal-hay, Abdalla, Hwang, Myung-Goo and Lim, Jae Kyoo (2012) In vitro bioactivity of titanium implants coated with bicomponent hybrid biodegradable polymers. Journal of Sol-Gel Science and Technology, 64 3: 756-764. doi:10.1007/s10971-012-2912-6

Novel technique for polymeric nanofibers preparation: air jet spinning

Abdal-Hay, Abdalla, Barakat, Nasser A. M. and Lim, Jae Kyoo (2012) Novel technique for polymeric nanofibers preparation: air jet spinning. Science of Advanced Materials, 4 12: 1268-1275. doi:10.1166/sam.2012.1382

Biocorrosion behavior and cell viability of adhesive polymer coated magnesium based alloys for medical implants

Abdal-hay, Abdalla, Dewidar, Montasser and Lim, Jae Kyoo (2012) Biocorrosion behavior and cell viability of adhesive polymer coated magnesium based alloys for medical implants. Applied Surface Science, 261 536-546. doi:10.1016/j.apsusc.2012.08.051

Inactivation of pathogenic Klebsiella pneumoniae by CuO/TiO2 nanofibers: a multifunctional nanomaterial via one-step electrospinning

Yousef, Ayman, Barakat, Nasser A. M., Amna, Touseef, Al-Deyab, Salem S., Hassan, M. Shamshi, Abdel-Hay, Abdallah and Kim, Hak Yong (2012) Inactivation of pathogenic Klebsiella pneumoniae by CuO/TiO2 nanofibers: a multifunctional nanomaterial via one-step electrospinning. Ceramics International, 38 6: 4525-4532. doi:10.1016/j.ceramint.2012.02.029

Effect of diameters and alkali treatment on the tensile properties of date palm fiber reinforced epoxy composites

Abdal-hay, Abdalla, Suardana, Ngakan Putu Gede, Jung, Do Yeon, Choi, Kwang-Seog and Lim, Jae Kyoo (2012) Effect of diameters and alkali treatment on the tensile properties of date palm fiber reinforced epoxy composites. International Journal of Precision Engineering and Manufacturing, 13 7: 1199-1206. doi:10.1007/s12541-012-0159-3

Study on applied load and irradiation of ultraviolet (UV) aging of polycarbonate characteristics: consequences on mechanical properties

Jung, Do Yeon, Abdel-Hay, Abdallah and Lim, Jae Kyoo (2012). Study on applied load and irradiation of ultraviolet (UV) aging of polycarbonate characteristics: consequences on mechanical properties. In: Advanced Manufacturing Technology, ICMSE 2012. 3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012, Xiamen, China, (1361-1365). 27-29 March 2012. doi:10.4028/www.scientific.net/AMR.472-475.1361

Study on corrosion protection of nanocomposite layers (epoxy resin/ MWCNTs) based dip-coating on Mg alloy AM50

Jung, Do Yeon, Abdal-Hay, Abdalla, Park, Seok Geun and Lim, Jae Kyoo (2012). Study on corrosion protection of nanocomposite layers (epoxy resin/ MWCNTs) based dip-coating on Mg alloy AM50. In: ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. 15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, Venice, Italy, (). 24-28 June 2012.

Study on the degradation behavior nanocomposites coated on magnesium alloy for bone implants

Abdal-Hay, Abdalla, Park, Seok Geun, Jung, Do Yeon, Hassan, Mohamed K. and Lim, Jae Kyoo (2012). Study on the degradation behavior nanocomposites coated on magnesium alloy for bone implants. In: ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. 15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, Venice, Italy, (). 24-28 June 2012.

Study on water absorption and impact properties of vegetal composites material: Composite structures

Abdal-Hay, Abdalla, Jung, Do Yeon, Lee, Kang Il, Abdel-Jaber, G. T. and Lim, Jae Kyoo (2012). Study on water absorption and impact properties of vegetal composites material: Composite structures. In: Tianharry Chang, Smart Technologies for Materials. 2012 International Conference on Smart Technologies for Materials and Communication, ICSTMC 2012, Melbourne, Australia, (34-39). 15-16 March 2012. doi:10.4028/www.scientific.net/AMR.530.34