The University of Queensland

Microstructure and mechanical properties of cast Ti25Nb3Mo3Zr2Sn alloy

Wang, Gui, Kent, Damon, Paladugu, Mohanchand, Yu, Zhen Tao and Dargusch, Matthew S. (2010). Microstructure and mechanical properties of cast Ti25Nb3Mo3Zr2Sn alloy. In Zhengyi Jiang and Chunliang Zhang (Ed.), Manufacturing Science and Engineering I: International Conference on Manufacturing Science and Engineering (ICMSE 2009)Procedings, Zhuhai, Peoples Republic of China, 26-28 December, 2009 (pp. 488-491) Switzerland: Trans Tech Publications. doi:10.4028/www.scientific.net/AMR.97-101.488

Nucleation driving force for omega-assisted formation of alpha and associated omega morphology in beta-Ti alloys

Li, Tong, Kent, Damon, Sha, Gang, Liu, Hongwei, Fries, Suzana G., Ceguerra, Anna V., Dargusch, Matthew S. and Cairney, Julie M. (2018) Nucleation driving force for omega-assisted formation of alpha and associated omega morphology in beta-Ti alloys. Scripta Materialia, 155 149-154. doi:10.1016/j.scriptamat.2018.06.039

Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: a review

Attar, Hooyar, Ehtemam-Haghighi, Shima, Kent, Damon and Dargusch, Matthew S. (2018) Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: a review. International Journal of Machine Tools and Manufacture, 133 85-102. doi:10.1016/j.ijmachtools.2018.06.003

Insights into Machining of a β Titanium Biomedical Alloy from Chip Microstructures

Trace carbon addition to refine microstructure and enhance properties of additive-manufactured Ti-6Al-4V

Mereddy, S., Bermingham, M. J., Kent, D., Dehghan-Manshadi, A., Stjohn, D. H. and Dargusch, M. S. (2018) Trace carbon addition to refine microstructure and enhance properties of additive-manufactured Ti-6Al-4V. JOM, 70 9: 1670-1676. doi:10.1007/s11837-018-2994-x

Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments

Bermingham, M. J., Nicastro, L., Kent, D., Chen, Y. and Dargusch, M. S. (2018) Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments. Journal of Alloys and Compounds, 753 247-255. doi:10.1016/j.jallcom.2018.04.158

Biocompatible porous titanium scaffolds produced using a novel space holder technique

Chen, Yunhui, Frith, Jessica Ellen, Dehghan-Manshadi, Ali, Kent, Damon, Bermingham, Michael and Dargusch, Matthew (2018) Biocompatible porous titanium scaffolds produced using a novel space holder technique. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, . doi:10.1002/jbm.b.34060

Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes

Attar, Hooyar, Dargusch, Matthew S., Ehtemam-Haghighi, Shima, Kent, Damon and Wu, Xinhua (2017) Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes. Materials Science and Engineering: A, 705 385-393. doi:10.1016/j.msea.2017.08.103

Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering

Chen, Yunhui, Frith, Jessica Ellen, Dehghan-Manshadi, Ali, Attar, Hooyar, Kent, Damon, Soro, Nicolas Dominique Mathieu, Bermingham, Michael J. and Dargusch, Matthew S. (2017) Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering. Journal of the Mechanical Behavior of Biomedical Materials, 75 169-174. doi:10.1016/j.jmbbm.2017.07.015

Manufacturing of graded titanium scaffolds using a novel space holder technique

Chen, Yunhui , Kent, Damon , Bermingham, Michael , Dehghan-Manshadi, Ali , Wang, Gui , Wen, Cuie and Dargusch, Matthew (2017) Manufacturing of graded titanium scaffolds using a novel space holder technique. Bioactive Materials, 2 4: 248-252. doi:10.1016/j.bioactmat.2017.07.001

Manufacturing of biocompatible porous titanium scaffolds using a novel spherical sugar pellet space holder

Chen, Yunhui, Kent, Damon, Bermingham, Michael, Dehghan-Manshadi, Ali and Dargusch, Matthew (2017) Manufacturing of biocompatible porous titanium scaffolds using a novel spherical sugar pellet space holder. Materials Letters, 195 92-95. doi:10.1016/j.matlet.2017.02.092

Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bӧnisch, M., Volegov, A. S., Calin, M., Eckert, J. and Dargusch, M. S. (2017) Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting. Materials Science and Engineering: A, 688 20-26. doi:10.1016/j.msea.2017.01.096

The role of ω in the precipitation of α in near-β Ti alloys

Li, Tong, Kent, Damon, Sha, Gang, Cairney, Julie M. and Dargusch, Matthew S. (2016) The role of ω in the precipitation of α in near-β Ti alloys. Scripta Materialia, 117 92-95. doi:10.1016/j.scriptamat.2016.02.026

New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys

Li, Tong, Kent, Damon, Sha, Gang, Stephenson, Leigh T., Ceguerra, Anna V., Ringer, Simon P., Dargusch, Matthew S. and Cairney, Julie M. (2016) New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys. Acta Materialia, 106 353-366. doi:10.1016/j.actamat.2015.12.046

The dynamic response of a metastable β Ti-Nb alloy to high strain rates at room and elevated temperatures

Zhan, Hongyi, Wang, Gui, Kent, Damon and Dargusch, Matthew (2016) The dynamic response of a metastable β Ti-Nb alloy to high strain rates at room and elevated temperatures. Acta Materialia, 105 104-113. doi:10.1016/j.actamat.2015.11.056

An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloy

Zhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015) An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloy. Materials and Design, 85 256-265. doi:10.1016/j.matdes.2015.06.127

On the deformation mechanisms and strain rate sensitivity of a metastable β Ti-Nb alloy

Zhan, Hongyi, Zeng, Weidong, Wang, Gui, Kent, Damon and Dargusch, Matthew (2015) On the deformation mechanisms and strain rate sensitivity of a metastable β Ti-Nb alloy. Scripta Materialia, 107 34-37. doi:10.1016/j.scriptamat.2015.05.014

Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions

Bermingham, M. J., Kent, D., Zhan, H., StJohn, D. H. and Dargusch, M. S. (2015) Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions. Acta Materialia, 91 289-303. doi:10.1016/j.actamat.2015.03.035

Microstructure, elastic deformation behavior and mechanical properties of biomedical β-type titanium alloy thin-tube used for stents

Tian, Yuxing, Yu, Zhentao, Ong, Chun Yee Aaron, Kent, Damon and Wang, Gui (2015) Microstructure, elastic deformation behavior and mechanical properties of biomedical β-type titanium alloy thin-tube used for stents. Journal of the Mechanical Behavior of Biomedical Materials, 45 132-141. doi:10.1016/j.jmbbm.2015.02.001

A new understanding of the wear processes during laser assisted milling 17-4 precipitation hardened stainless steel

Bermingham, M. J., Kent, D. and Dargusch, M. S. (2015) A new understanding of the wear processes during laser assisted milling 17-4 precipitation hardened stainless steel. Wear, 328-329 518-530. doi:10.1016/j.wear.2015.03.025

Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures

Zhan, Hongyi, Zeng, Weidong, Wang, Gui, Kent, Damon and Dargusch, Matthew (2015) Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures. Materials Characterization, 102 103-113. doi:10.1016/j.matchar.2015.02.017

The mechanism of ω-assisted α phase formation in near β-Ti alloys

Li, Tong, Kent, Damon, Sha, Gang, Dargusch, Matthew S. and Cairney, Julie M. (2015) The mechanism of ω-assisted α phase formation in near β-Ti alloys. Scripta Materialia, 104 75-78. doi:10.1016/j.scriptamat.2015.04.007

Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical beta-titanium alloy

Zhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015) Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical beta-titanium alloy. Journal of the Mechanical Behavior of Biomedical Materials, 42 207-218. doi:10.1016/j.jmbbm.2014.11.013

Tool life and wear mechanisms in laser assisted milling Ti-6Al-4V

Bermingham, M. J., Sim, W. M., Kent, D., Gardiner, S. and Dargusch, M. S. (2015) Tool life and wear mechanisms in laser assisted milling Ti-6Al-4V. Wear, 322-323 151-163. doi:10.1016/j.wear.2014.11.001

Constitutive modelling of the flow behaviour of a β titanium alloy at high strain rates and elevated temperatures using the Johnson-Cook and modified Zerilli-Armstrong models

Zhan, Hongyi, Wang, Gui, Kent, Damon and Dargusch, Matthew (2014) Constitutive modelling of the flow behaviour of a β titanium alloy at high strain rates and elevated temperatures using the Johnson-Cook and modified Zerilli-Armstrong models. Materials Science and Engineering A, 612 71-79. doi:10.1016/j.msea.2014.06.030

The dynamic response of a β titanium alloy to high strain rates and elevated temperatures

Zhan, Hongyi, Kent, Damon, Wang, Gui and Dargusch, Matthew S. (2014) The dynamic response of a β titanium alloy to high strain rates and elevated temperatures. Materials Science and Engineering A, 607 417-426. doi:10.1016/j.msea.2014.04.028

Precipitation of the α-phase in an ultrafine grained beta-titanium alloy processed by severe plastic deformation

Li, Tong, Kent, Damon, Sha, Gang, Dargusch, Matthew S. and Cairney, Julia M. (2014) Precipitation of the α-phase in an ultrafine grained beta-titanium alloy processed by severe plastic deformation. Materials Science and Engineering A, 605 144-150. doi:10.1016/j.msea.2014.03.044

The cold-rolling behaviour of AZ31 tubes for fabrication of biodegradable stents

Zhang, Yaowu, Kent, Damon, Wang, Gui, StJohn, David and Dargusch, Matthew S. (2014) The cold-rolling behaviour of AZ31 tubes for fabrication of biodegradable stents. Journal of the Mechanical Behavior of Biomedical Materials, 39 292-303. doi:10.1016/j.jmbbm.2014.07.026

Effects of phase stability and processing on the mechanical properties of Ti-Nb based β Ti alloys

Kent, Damon, Wang, Gui and Dargusch, Matthew (2013) Effects of phase stability and processing on the mechanical properties of Ti-Nb based β Ti alloys. Journal of the Mechanical Behavior of Biomedical Materials, 28 15-25. doi:10.1016/j.jmbbm.2013.07.007

Thermal stability of an ultrafine grain β-Ti alloy

Kent, D., Xiao, W. L., Wang, G., Yu, Z. and Dargusch, M. S. (2012) Thermal stability of an ultrafine grain β-Ti alloy. Materials Science and Engineering A, 556 582-587. doi:10.1016/j.msea.2012.07.030

Thermal analysis of precipitation reactions in a Ti-25Nb-3Mo-3Zr-2Sn alloy

Kent, Damon, Pas, Steven, Zhu, Suming, Wang, Gui and Dargusch, Matthew S. (2012) Thermal analysis of precipitation reactions in a Ti-25Nb-3Mo-3Zr-2Sn alloy. Applied Physics A: Materials Science and Processing, 107 4: 835-841. doi:10.1007/s00339-012-6778-9

A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti-6Al-4V cutting

Bermingham, M. J., Palanisamy, S., Kent, D. and Dargusch, M. S. (2012) A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti-6Al-4V cutting. Journal of Materials Processing Technology, 212 4: 752-765. doi:10.1016/j.jmatprotec.2011.10.027

Influence of ageing temperature and heating rate on the properties and microstructure of beta Ti alloy, Ti-6Cr-5Mo-5V-4Al

Kent, D., Wang, G., Wang, W. and Dargusch, M. S. (2012) Influence of ageing temperature and heating rate on the properties and microstructure of beta Ti alloy, Ti-6Cr-5Mo-5V-4Al. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 531 98-106. doi:10.1016/j.msea.2011.10.040

A morphological study of nitride formed on Al at low temperature in the presence of Mg

Kent, D., Drennan, J. and Schaffer, G.B. (2011) A morphological study of nitride formed on Al at low temperature in the presence of Mg. Acta Materialia, 59 6: 2469-2480. doi:10.1016/j.actamat.2010.12.050

Strength enhancement of a biomedical titanium alloy through a modified accumulative roll bonding technique

Kent, Damon, Wang, Gui, Yu, Zhentao, Ma, Xiqun and Dargusch, Matthew (2011) Strength enhancement of a biomedical titanium alloy through a modified accumulative roll bonding technique. Journal of the Mechanical Behavior of Biomedical Materials, 4 3: 405-416. doi:10.1016/j.jmbbm.2010.11.013

Strengthening of cast Ti-25Nb-3Mo-3Zr-2Sn alloy through precipitation of α in two discrete crystallographic orientations

Paladugu, Mohanchand, Kent, Damon, Wang, Gui, Yu, Zhentao and Dargusch, Matthew S. (2010) Strengthening of cast Ti-25Nb-3Mo-3Zr-2Sn alloy through precipitation of α in two discrete crystallographic orientations. Materials Science and Engineering A, 527 24-25: 6601-6606. doi:10.1016/j.msea.2010.06.075

Corrigendum to "Pseudoelastic behaviour of a beta Ti–25Nb–3Zr–3Mo–2Sn alloy" [Mater. Sci. Eng. A 527 (2010) 2246–2252]

Kent, D., Wang, G., Yu, Z. and Dargusch, M. S. (2010) Corrigendum to "Pseudoelastic behaviour of a beta Ti–25Nb–3Zr–3Mo–2Sn alloy" [Mater. Sci. Eng. A 527 (2010) 2246–2252]. Materials Science and Engineering: A, 527 16-17: 4524-4524. doi:10.1016/j.msea.2010.03.060

Formation of aluminium nitride during sintering of powder injection moulded aluminium

Kent, D., Qian, M. and Schaffer, G. B. (2010) Formation of aluminium nitride during sintering of powder injection moulded aluminium. Powder Metallurgy, 53 2: 118-124. doi:10.1179/003258909X12523294330154

Pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy

Kent, D., Wang, G., Yu, Z. and Dargusch, M. S. (2010) Pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 527 9: 2246-2252. doi:10.1016/j.msea.2009.11.059

Powder Injection Molding of Al-(Steel and Magnet) Hybrid Components

Liu, Z.Y., Kent, D. and Schaffer, G.B. (2009) Powder Injection Molding of Al-(Steel and Magnet) Hybrid Components. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 40A 12: 2785-2788. doi:10.1007/s11661-009-0012-1

Powder injection moulding of an Al-AlN metal matrix composite

Liu, Z.Y., Kent, D. and Schaffer, G.B. (2009) Powder injection moulding of an Al-AlN metal matrix composite. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 513-14 352-356. doi:10.1016/j.msea.2009.02.001

A novel method for the production of aluminium nitride

Kent, D., Schaffer, G. B., Sercombe, T. B. and Drennan, J. (2006) A novel method for the production of aluminium nitride. Scripta Materialia, 54 12: 2125-2129. doi:10.1016/j.scriptamat.2006.02.047

Age hardening of a sintered Al-Cu-Mg-Si-(Sn) alloy

Kent, D., Schaffer, G. B. and Drennan, J. (2005) Age hardening of a sintered Al-Cu-Mg-Si-(Sn) alloy. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 405 1-2: 65-73. doi:10.1016/j.msea.2005.05.104

Development of ultrafine and nano-crystalline grain structures during modified accumulative roll bonding of titanium alloy, Ti-25Nb-3Zr-3Mo-2Sn

Kent, Damon, Wang, Gui, Yu, Zhentao, Ma, Xiqun and Dargusch, Matthew S. (2012). Development of ultrafine and nano-crystalline grain structures during modified accumulative roll bonding of titanium alloy, Ti-25Nb-3Zr-3Mo-2Sn. In: Lian Zhou, Hui Chang, Yafeng Lu and Dongsheng Xu, Proceedings of the 12th World Conference on Titanium. 12th World Conference on Titanium (Ti-2011 ), Beijing, China, (2111-2115). 19-24 June 2011.

The aging response of a metastable β Ti alloy, BTi-6554

Wang, Yongqiang, Wang, Gui, Wang, Weiqi, Kent, Damon and Dargusch, Matthew S. (2011). The aging response of a metastable β Ti alloy, BTi-6554. In: Dieringa, H, Hort, N and Kainer, KU, The 5th International Light Metals Technology Conference (LMT 2011), Lüneburg, Germany, (29-32). 19–22 July 2011. doi:10.4028/www.scientific.net/MSF.690.29

The effect of HIPping on the microstructure and tensile properties of cast BTi-6554 alloy

Wang, Yongmei, Wang, Gui, Wang, Weiqi, Kent, Damon and Dargusch, Matthew S. (2011). The effect of HIPping on the microstructure and tensile properties of cast BTi-6554 alloy. In: Dieringa, H, Hort, N and Kainer, KU, The 5th International Light Metals Technology Conference (LMT 2011), Lüneburg, Germany, (33-36). 19–22 July 2011. doi:10.4028/www.scientific.net/MSF.690.33

Influence of heat treatment on the pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy

Kent, Damon, Wang,Gui, Zheng, Li Hui, Yu, Zhen Tao and Dargusch, Matthew S. (2010). Influence of heat treatment on the pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy. In: Jian-Feng Nie and Allan Morton, PRICM7: Selected peer review papers from the seventh Pacific Rim International Conference on Advanced Materials and Processing. 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns, QLD, Australia, (871-874). 2-6 August 2010. doi:10.4028/www.scientific.net/MSF.654-656.871

The effect of temperature on the microstructure of a metastable beta titanium alloy

Wang, Gui, Wang, Weiqi, Yang, Yulan, Kent, Damon and Dargusch, Matthew S. (2010). The effect of temperature on the microstructure of a metastable beta titanium alloy. In: Jian-Feng Nie and Allan Morton, Seventh Pacific Rim International Conference on Advanced Materials and Processing - PRICM (2010). Pacific Rim International Conference on Advanced Materials and Processing, Cairns, QLD, Australia, (847-850). 2-6 August 2010. doi:10.4028/www.scientific.net/MSF.654-656.847

Powder injection molding of Al-(Steel and Magnet) hybrid components

Liu, Z. Y., Kent, D. and Schaffer, G. B. (2009). Powder injection molding of Al-(Steel and Magnet) hybrid components. In: , , (2785-2788). . doi:10.1007/s11661-009-0012-1

Formation of aluminium nitride during sintering of powder injection moulded aluminium

Kent, Damon, Schaffer, Graham, Qian, Ma and Liu, Zhenyun (2009). Formation of aluminium nitride during sintering of powder injection moulded aluminium. In: M. S. Dargusch, Materials Science Forum: Proceedings of the 4th International Light Metals Technology conference. Light Metals Technology 2009, Gold Coast, Brisbane, Australia, (631-634). 1-3 July 2009. doi:10.4028/www.scientific.net/MSF.618-619.631

Formation of aluminum nitride during sintering of aluminum

Kent, Damon, Schaffer, Graham B., Qian, Ma and Liu, Zhenyun (2009). Formation of aluminum nitride during sintering of aluminum. In: Thomas J Jesberger and Stephen J Mashi, Advances in Powder Metallurgy and Particulate Materials - 2009, Proceedings of the 2009 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2009. 2009 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2009, Las Vegas, NV United States, (7189-7198). 28 June - 1 July 2009.

The in-situ fabrication of Al-AlN composites from metal powders and their resistance to wear and cavitation

Qian, Ma, Kondoh, K., Kent, D., Umeda, J., Yu, P. and Schaffer, G. B. (2009). The in-situ fabrication of Al-AlN composites from metal powders and their resistance to wear and cavitation. In: M. S. Dargusch, Materials Science Forum: Proceedings of the 4th International Light Metals Technology conference. Light Metals Technology 2009, Gold Coast, Brisbane, Australia, (617-620). 1-3 July 2009. doi:10.4028/www.scientific.net/MSF.618-619.617

Novel Aluminium Nitride Surface Coatings Formed on Aluminium

Kent, D, Schaffer, G. B. and Drennan, J. (2007). Novel Aluminium Nitride Surface Coatings Formed on Aluminium. In: Chang, YW, Kim, NJ and Lee, CS, Materials Science Forum: 6th Pacific Rim International Conference on Advanced Materials and Processing. 6th Pacific Rim International Conference on Advanced Materials and Processing, Cheju Island, Korea, (571-575). 5th - 9th November, 2007. doi:10.4028/www.scientific.net/MSF.561-565.571

Synthesis and Characterisation of Aluminium Nitride Formed on Aluminium at Low Temperature

Kent, Damon (2008). Synthesis and Characterisation of Aluminium Nitride Formed on Aluminium at Low Temperature PhD Thesis, School of Engineering, The University of Queensland.

Age hardening of sintered Al-Cu-Mg-Si-Sn alloys

Kent, Damon (2004). Age hardening of sintered Al-Cu-Mg-Si-Sn alloys MPhil Thesis, School of Engineering, The University of Queensland.